环保型带胶热缩套管( 双 壁 管 ) KL-DWT Environmental protection type adhesiveheat shrink tube
Environmental protection type adhesive heat shrink tube is a semi flexible heat shrinkable tube inner layer with hot melt adhesive, the outer layer is made of polyolefin. The inner wall is specially designed colloid ality when heated, the inner wall is melted and the pores or gaps are filled with the outer wall, after cooling, double wall\pipe wall thickness is uniform and solid. Widely used in electrical equipment, wire and cable, wire branch of the seal, metal pipeline corrosion protection, as well as to prevent the loose and fall off from the polymer chain Such as underwater
lighting, automotive tubing, advanced wire harness, etc.
规格specifications
扩张后 As Supplied ( mm )
收缩 After Recovery(mm)
Φ2.4
2.4
0.40±0.15
0.8
0.85±0.25
0.35±0.10
Φ3.2
3.2
0.40±0.15
1.0
0.85±0.25
0.35±0.10
Φ4.7
4.7
0.40±0.15
1.5
1.05±0.25
0.45±0.10
Φ6.4
6.4
0.45±0.15
2.0
1.10±0.25
0.45±0.10
Φ7.9
7.9
0.60±0.20
2.5
1.35±0.25
0.45±0.10
Φ9.5
9.5
0.60±0.20
3.0
1.45±0.25
0.45±0.10
Φ80MAX
.....
.....
.....
.....
.....
备注Remark
1、壁厚包括内层热熔胶厚度( Wall thickness include adhesives)
2、可接受特殊规格产品订单( Other sizes are available upon special order)
3、标准颜色为黑色可接受其他颜色订货( Standard black, Special colors available on request)
4、因高倍率双壁管生产工艺复杂,过程中一些不可控因素,造成产品壁厚,收缩率较单壁管会有明显偏差.
Due to high rate double wall tube's the complex production process and some uncontrollable in the process, the
wall thickness and shrinkage rate of the product will be significantly different from that of the single wall tube.
