丙烯酸酯玻璃纤维套管KL-2470 Polyurethanes fiberglass sleeving
丙烯酸酯玻璃纤维软管是由无碱玻璃纤维编织成坯管，再涂以丙烯酸酯乳胶经加热烘干而成的B级绝缘软管。具有可靠的耐热性，良好的电性能，较好的的柔软性和弹性，以及耐苯、耐油等特性，适用于电机、电器、仪器、仪表、无线电、电视机及空调、风扇、洗衣机等家用电器的布线绝缘和机械保护。外观：表面光洁，端部整齐。耐油：软管在105±2℃ 的变压器油中浸24小时，漆膜不应与玻璃丝管脱开或产生开裂，允许漆管颜色变深。耐苯:漆管在常温甲苯液体中浸4小时，漆膜不发粘贴或脱落。
Acrylic glass fiber sleeving is woven E-glass fiber blank tube, coated with acrylic latex is made by heating and drying of the Class B insulation hose. Reliable heat resistance, good electrical properties, good softness and flexibility, and resistance to benzene, oil and other properties, for electrical, electronics,instruments, meters,radio,TV and air-conditioning, fans, washing machines, etc. appliance wiring insulation and mechanical protection.
Appearance: smooth surface, the ends neatly.
Oil: hose at 105 ± 2 ℃ transformer oil immersed for 24 hours, the film should not be torn off or cracking glass tube, allowing the paint tube darker.
Resistance to benzene: toluene liquid paint tube immersed at room temperature 4 hours, the film is not made paste or off.
产品规格表(Specifications）:
内径（mm）Inside diameter
壁厚(mm) Wall thickness
标 称（mm）Nominal size (mm)
偏 差（±） Deviation (±)
小Minimum
大Maximum
0.3、0.5、0.8
±0.10
0.20
0.50
1.0、1.5
±0.15
0.20
0.75
2.0、2.5
±0.20
0.20
0.75
3.0、3.5、4.0、5.0、6.0
±0.25
0.20
0.75
7.0、8.0
±0.50
0.30
0.75
9.0、10.0、12.0、14.0、16.0、18.0
±0.50
0.40
0.90
20.0、23.0、25.0、27.0
±0.50
0.40
1.00
技术参数Technical parameters
软管在130±2摄氏度的环境下处理24小时，然后于20±2摄氏度的室温下在规定棒径上缠绕:
The hose is processed in an environment of 130±2
软管在 105±2 摄氏度的变压器油中浸 24 小时: The hose is immersed in transformer oil at 105±2 degrees
Celsius for 24 hours
漆膜不发粘或脱落:
The paint film does not stick or fall off
认可标准：JB-T8151.3-1999
性能 Performance
指 标 Indicators
常态时: Normal state
≥2.5
受潮后: Wet state
≥1.5
缠绕后: After twineing
≥1.2
弹性: Elasticity
耐油: Oil resistant
耐苯: Benzene resistant
Note:其他规格可按客户要求定做Other specifications may product according to customer requirements
